Stator For Yamaha | YFM 600 Grizzly | 1998

Home/ATV CITY/Stator/Charging Coils/Stator For Yamaha | YFM 600 Grizzly | 1998

Please call before visiting our unit in Ilfracombe - 01271 320727

Stator For Yamaha | YFM 600 Grizzly | 1998

£164.90 Excluding VAT | (Price with VAT : £197.88)

1 in stock

RM01028

1 in stock

SKU: RM01028 Categories: , ,

Description

Replacement Stator | Yamaha

Don’t forget to compliment your new Stator with a brand new Cover Gasket: RM08002

Used on the following applications:

YFM 600 Grizzly

1998

 

Replaces these genuine manufacturers’ part numbers:

 

4WV-85510-00-00

 

For full application / interchanges listing, please see our part Application / Fitment section below

Reviews

There are no reviews yet.

Be the first to review “Stator For Yamaha | YFM 600 Grizzly | 1998”

Your email address will not be published. Required fields are marked *

Source 1 : Green to Black = 300 ohms+/-20%
Pick up 1 : Red to White = 500 ohms+/-20%
Alternator : White Between each White = 0.9 ohms+/-20%
Alternator : White to Ground = O.L. ON DISPLAY
Before installing your new stator

Check the AC output of the stator.

Replace any burned or corroded connectors on stator and regulator/rectifier

Check and repair any melted wiring.

Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".