Yamaha FZ1 | FZ8 | YFZ-R1 Stator Coil For | Replaces 2D1-81410-10-00

Home/ATV CITY/Stator/Charging Coils/Yamaha FZ1 | FZ8 | YFZ-R1 Stator Coil For | Replaces 2D1-81410-10-00

Please call before visiting our unit in Ilfracombe - 01271 320727

Yamaha FZ1 | FZ8 | YFZ-R1 Stator Coil For | Replaces 2D1-81410-10-00

£121.25 Excluding VAT | (Price with VAT : £145.50)

3 in stock


3 in stock

SKU: RM01303 Categories: , ,


Brand new generator stator

Direct replacement to your original unit

Plug-and-play, direct fit, easy installation.

Highest grade lamination materials

Highest grade copper windings, resistant to 200 degrees Celsius.

Connector included

Rubber grommet included

All product shipped are tested

One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.


There are no reviews yet.

Be the first to review “Yamaha FZ1 | FZ8 | YFZ-R1 Stator Coil For | Replaces 2D1-81410-10-00”

Your email address will not be published. Required fields are marked *

Interior diameter: 18mm 
Exterior diameter: 68mm 
Thickness: 42mm 
Length of wires stator to grommet: 125mm
Length of wires grommet to plug: 500mm

Other specifications:
Number of wires: 3
Number of plugs: 1
Number of pins: 3

Wire to wire resistance:
Alternator: = 0.4ohms +/-20%

Before installing your new stator

Check the AC output of the stator.

Replace any burned or corroded connectors on stator and regulator/rectifier

Check and repair any melted wiring.

Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.